- Synthesis and Compaction of Al-based Nanopowders by Pulsed Discharge Method
-
Chang-Kyu Rhee, Geun-Hee Lee, Whung-Whoe Kim
-
J Korean Powder Metall Inst. 2002;9(6):433-440.
-
DOI: https://doi.org/10.4150/KPMI.2002.9.6.433
-
-
31
View
-
1
Download
-
11
Citations
-
 Abstract
 PDF
- Synthesis and compaction of Al-base nano powders by pulsed discharge method were investigated. The aluminum based powders with 50 to 200 nm of diameter were produced by pulsed wire evaporation method. The powders were covered with very thin oxide layer. The perspective process for the compaction and sintering of nanostructured metal-based materials stable in a wide temperature range can be seen in the densification of nano-sized metal powders with uniformly distributed hard ceramic particles. The promising approach lies in utilization of natural uniform mixtures of metal and ceramic phases, e.g. partially oxidized metal powders as fabricated in our synthesis method. Their particles consist of metal grains coated with oxide films. To construct a metal-matrix material from such powder, it is necessary to destroy the hard oxide coatings of particles during the compaction process. This goal was realized in our experiments with intensive magnetic pulsed compaction of aluminum nanopowders passivated in air.
-
Citations
Citations to this article as recorded by  - Thermodynamic modeling and characterizations of Al nanoparticles produced by electrical wire explosion process
L. Santhosh Kumar, S.R. Chakravarthi, R. Sarathi, R. Jayaganthan
Journal of Materials Research.2017; 32(4): 897. CrossRef - Electrochemical properties of Sn/C nanoparticles fabricated by redox treatment and pulsed wire evaporation method
Ju-Seok Song, Gyu-Bong Cho, Jou-Hyeon Ahn, Kwon-Koo Cho
Applied Surface Science.2017; 415: 14. CrossRef - Investigation of Nano-Molybdenum Carbide Particle Produced by Wire-Explosion Process
Ramanujam Sarathi, Ravula Sugunakar Reddy, Rashmi S. Tavarmani, Akira Okamoto, Hisayuki Suematsu, Parasuraman Selvam, Uthandi Kamachi Mudali, Muthusamy Kamaraj
IEEE Transactions on Plasma Science.2015; 43(10): 3470. CrossRef - Synthesis and characterization of hexagonal nano tungsten carbide powder using multi walled carbon nanotubes
S. Aravinth, Binu Sankar, M. Kamaraj, S.R. Chakravarthy, R. Sarathi
International Journal of Refractory Metals and Hard Materials.2012; 33: 53. CrossRef - Synthesis and characterization of copper nanoparticles by using the exploding wire method
Rashmita Das, Basanta Kumar Das, Anurag Shyam
Journal of the Korean Physical Society.2012; 61(5): 710. CrossRef - Generation and characterization of nano-tungsten carbide particles by wire explosion process
B. Debalina, M. Kamaraj, B.S. Murthy, S.R. Chakravarthi, R. Sarathi
Journal of Alloys and Compounds.2010; 496(1-2): 122. CrossRef - Understanding the mechanism of nano-aluminum particle formation by wire explosion process using optical emission technique
Jobin K. Antony, Nilesh J. Vasa, S.R. Chakravarthy, R. Sarathi
Journal of Quantitative Spectroscopy and Radiative Transfer.2010; 111(17-18): 2509. CrossRef - Understanding nanoparticle formation by a wire explosion process through experimental and modelling studies
T K Sindhu, R Sarathi, S R Chakravarthy
Nanotechnology.2008; 19(2): 025703. CrossRef - Generation and characterization of nano aluminium powder obtained through wire explosion process
T. K. Sindhu, R. Sarathi, S. R. Chakravarthy
Bulletin of Materials Science.2007; 30(2): 187. CrossRef - Impact of binary gas on nano-aluminium particle formation through wire explosion process
R. Sarathi, T.K. Sindhu, S.R. Chakravarthy
Materials Letters.2007; 61(8-9): 1823. CrossRef - Generation of nano aluminium powder through wire explosion process and its characterization
R. Sarathi, T.K. Sindhu, S.R. Chakravarthy
Materials Characterization.2007; 58(2): 148. CrossRef
|
kpmi
